Schnek "Tonar" for the screwdriver Altay Energy 130r, right rotation SAE-130R

Altay Energy 130R with a diameter of 130 mm and right rotation is designed for comfortable drilling ice using a screwdriver. The verified angle of attack makes the drilling fast. When joining the screw to the screwdriver, it is necessary to use the adapter (* additional option - ash.2023PK, ash.2023.PS, ash.2023, ash.2023.pk.t.) and the M6 ​​screw (special). It is allowed to join the adapters with the diameter of the output shaft from 19 to 20 mm. The diameter of the connecting opening of the screw of the screw is 20 mm. You can also use the telescopic adapter ash.20.23PK.T. We recommend operating a screw with an 18V voltage with a screwdriver and a maximum torque of not more than 120 nm. At a screwdriver, you should set the “drill” mode and switch rotation speed to '1', which will provide the maximum torque of the screwdriver and effective drilling of ice. To join the screw to the motor shaft, it is necessary to use the M6 ​​screw m6 (additional option). It is allowed to join the motorized boots with a 20 mm output shaft diameter. If the thickness of the ice is more than one meter, then it is necessary to install the extension cord of the Ush-250.20 or Ush-400.20 screw, which will increase the drilling depth by 25 and 40 cm, respectively, the extension cord-500.20 (an increase in depth by 570 mm) or the telescopic extension-800.20.20.20.20.20.20 (increase in depth to 665 mm). For the best result of drilling, the screws are equipped with semicircular knives 130r wet ice (art. NLH-130R.ML) for the right rotation of production 'Tonar'. Technical characteristics: right rotation. Diameter of drilling: 130 +- 5 mm. Drilling depth: 1000 mm. The length of the spiral of the screw: 600 mm. Product length: 1034 +- 5 mm. The diameter of the connecting hole: 20.2 mm. Weight: 1.95 (± 0.1) kg. Summary: screw - 1 pc. Knives - 1 set. Screw M6x12 - 4 pcs. Protective case for knives- 1 pc. Barashka screw M6 - 1 pc.