SD-548C1 cycle computer, 14 functions, wireless

Sundling SD-548C’s wireless bicycle computer is designed for bike rods and has a number of functions that are useful for a cyclist.

the device

• data wireless transmission.
• SPD - current speed: the readings of the current speed of movement play the role of a speedometer. The current speed is constantly displayed on the screen. The maximum possible value is 99.9 km/h, measurement error - 0.1 km/h.
• ODO - odometer: the value of the total bicycle run, counted from the moment the cycling is turned on during the first trip to the bicycle (0 km ) And before reaching the value of 9999 km.
• DST - distance: the distance traveled by the bicycle from the moment of the previous zero (the indication can be reset at any time).
• max - maximum speed: maximum speed The speed recorded by a bicycle complex during a current bicycle trip.
• AVS is the average speed: the average speed recorded by a bicycle complex during a current bicycle trip.
• M is the duration of the current trip in time.
• clk - clock.
• scan - a mode in which the parameters displayed on the display cyclically change: the distance of the trip, the travel time, the average speed, the maximum speed and so on. << /li>
• “+”/“-”-comparator: an increase in the increase in the current speed.
• Regulation of the speed scale (kilometers and miles per hour).
• setting type Circumference - measurement of the tire circumference.
• setting the Last Value of Odometer/ODO - a change in the latest odometer readings.
• freeze Frame Memory - memory of the latest data.
• Auto On/OFF - Auto inclusion/disability.
Paul's effectiveness
<< Maximal distance between the sensor and the computer: from 60 to 90 cm.
• The maximum angle between the sensor and the computer: 30 °.
• The distance between the magnet and the sensor should be no more than 5 mm.
• Large LCD display: 31 x 12 mm.
• automatic shutdown: after 8 minutes, if the device is not used.
• Quick scanning: 4 seconds.
• measurements in kilometers or miles.

The delivery kit includes

• 1 Sundling SD-548C odometer
• 1 mount on the steering wheel.
• 1 sensor (set for a fork).
• 1 magnet (attached to the knitting needle).
• 1 Element of power (1.5 V/CR2032).
• 4 cable screed.

characteristics

• size: 4.5 x 4.5 x 1.8 cm.