Set for bicycle 3 in 1: lantern, repair set, bag 20 x 20 x 27 cm

A set for a bicycle 3 in 1: lantern, repair kit, bag 20 x 20 x 27 cm. A set of tools for a bicycle is necessary to carry out various works on the maintenance and repair of a bicycle. Using such a set, you can independently eliminate most of the malfunctions, as well as conduct a preventive inspection and configuration of your bicycle. For example, you can replace the camera or tire, configure the brake system, repair the frame or fork. The set includes: a black bag from Oxford, which can be attached to the bicycle frame; 1 combined (family) key is made of metal, 2 mounts (installations) for overwhelming wheels are made of metal, 5 patch for tires, 1 glue, 1 sandpaper for cleaning, 2 gum for nipple, a key to removing the topkeep of bicycle forks, a lantern and a lantern and a topkep key and a key Farah. The lantern and headlight have the degree of dust and moisture protection, which will enjoy lean in walks regardless of weather conditions. The bicycle headlight has a glow brightness of 100 lumens and a range of 50 meters, which provides a wide angle of lighting of the road in front. The headlight for a bicycle with 2 glow modes allows you to configure the intensity for yourself. The front lamp works on batteries from four batteries of the AAA "Mizism". A bicycle headlight with a simple mount makes it possible to install on a frame or steering wheel in a matter of seconds, thanks to a convenient clamp with a rubber lining, which tightly wrapps the steering wheel and prevents scrolling while driving. Installation diameter 2-2.8 cm. Convenient and bright bicycle headlights have an advantage among such models - this is a convex and convenient button in the center of the case. The rear light on the bicycle is included in the front headlight. He is also protected from moisture and dirt. The rear flashlight on the bicycle has a brightness of 50 lumen, which is enough for night trips, now your dimensions will definitely be visible even in complete darkness and in the complete absence of other light sources. The rear dimensions have 3 types of glow, adjusted to the side button. The bicycle dimensions also work from two AAA of the Mismachikov AAA. Front flashlight: material - ABS -plastic; Type of power - 4 AAA batteries (not included); The number of operating modes of the front lamp is 2; The number of diodes is 5 LEDs; Ray range - 50 meters; Brightness - 100 lumens; The switch is a button switch on the case. Rear lamp: material - ABS -plastic; Type of power - 2 AAA batteries (not included); The number of operating modes of the front lamp is 3; The number of diodes is 5 LEDs; Brightness - 50 lumens; The switch is a button switch on the case.

A kit for a bicycle saves time and money: you do not need to contact the workshop every time you have problems with the bicycle. Allows repairs anywhere and at any time. It provides better repairs: knowing how your bike works, you can carry out repairs more carefully and carefully. It expands the possibilities of using a bicycle: with a set of tools, you can not only repair your bicycle, but also help friends and acquaintances in case of problems.

Instructions for use

1. We disconnect the wheel from the bicycle and with the help of installations we select the tire, and then remove the camera.

2. We carefully examine the camera for air leakage and determine the place of the puncture.

3. Using sandpaper, we clean the place around the puncture with an area of ​​slightly more than the patch.

4. We apply the glue on the prepared surface with a thin layer and withstand for 3 minutes.

5. We remove the protective layer from the patch and with effort we put it to the place of puncture.

6. Put the camera for the press or press it with your foot for 5-10 minutes.

7. We install the camera on the rim of the wheels and return the tire to place.

8. Repair is completed. It remains only to find the pump and pump up the wheel to continue the interrupted bicycle passage.