Silicone oil Rexant, PMS-10000, 100 ml

Polymethylsiloxane fluid PMS-10000 (GOST 13032-77) Rexant-colorless, transparent, chemically inert and corrosion-resistant silicone fluid without smell.

Unlike mineral or synthetic oils, this fluid has excellent electrical insulating, anti -adhesive and foaming properties.

Scope:

• Lubrication of rubber seals and the processing of high -voltage wires.
• The basis of low -temperature and high -temperature:
  • consistent lubricants, pastes and petroleum jelly;
  • motor and transmission oils.
• as a dividing (metal-plastic, plastic resin, etc.) and anti-adhesive lubrication of press forms when forming and extruding products from plastic materials:
  • in the production of rubber and plastic products;
  • in the tire industry;
  • for conveyor ribbons;
  • in the production of rubber;
  • In the production of plastic products.
• liquid for instruments and mechanisms:
  • cooling;
  • depreciation;
  • hydraulic;
  • damping;
  • dielectric;
  • anti -adhesion;
  • dividing.
  • as a coolant with a temperature range of –100...+300 ° C. As an additive in politicians and various household chemicals in:
    • polishing compounds and mastic;
    • Furnitures for furniture;
    • Polys for cars;
    ;
    • household chemicals;
    • cosmetics, the basis of creams from tanning, lipstick and so on;
    • hair care compounds;
    • for shoes, leather products;
    • mastic for the floor.
  • Masteration for woolen semi -finished products in garlic and weaving industries.
  • for power transformers, rectifiers, magnetrons, etc., as a cooling and dielectric fluid (including the replacement of the Soviet-10)..
  • The basis of foaming for:
    • textile industry;
    • of the oil and gas industry drilling solutions;
    • for any process and production;
    • food industry (stabilizing, anti -deposit additive E900).
  • in the textile industry to soften tissues from cotton and synthetics, giving technical tissues of the properties of water -repellent and abrasive strength.
  • for the production of various emulsions and additives in the manufacture of paints, sealants, protective and polishing coatings, adhesives, etc.

  Thus, the areas of the use of silicone fluids are constantly expanding Thanks to the improvement of production technology and reducing the cost of its production.

  Basic properties:

  • PMS fluids to high and low temperatures, they do not form residues on the treated surfaces, prevent the adhesion of thermoplastic materials to each other.
  • The stability of the physical properties of the PMS liquids in a wide range of operating temperatures –40...+200 ° C
  • excellent characteristics of viscosity/temperature, high compressibility and resistance to the shift.
  • PMS fluids give excellent properties of sliding and hydrophobic plastics and rubber, reduce surface friction. Li>
  • Electric characteristics of the PMS liquids are practically unchanged at high and low temperatures in a wide frequency range.
  • form a hydrophobic protective film.
  • resistance to radiation.
  • Low surface tension, strong hydrophobic properties.
  • The temperature of the solidification is below –60 ° C