Silicone sealant 1100 Abro Masters, Black, 70 g SS-1100-3-BLK-RE

A universal 100%silicone sealant based on acetic acid. It is replaced for sealing and gluing all types of seams and joints, suitable for gluing glasses. It can be used in all cases when isolation from external influences, high moisture resistance and strength. Summary:- has a high adhesion to aluminum, glass, porcelain, rubber, ceramics, plastics, painted surfaces, not an oily tree and metal;- forms durable seam with low shrinkage;- suitable for internal and external work;- a wide temperature range of operation from -50 to +200C;- waterproof, optimal for use in a wet room (sauna, bathroom, pool);- contains fungicidal additives that prevent mold formation and mold and water fungus;- frost-resistant;- after hardening, retains elasticity;- high volcanic speed, low density;- takes any shape and successfully withstands compression, stretching and shift;- is resistant to chemical solutions. Processing: 1. Clean, degrease and dry the surface. 2. Remove the cap, cut the tip of the nozzle so as to create a hole of the required size. 3. For a flat sealant, keep it at an angle of 45 to the surface. 4. Remove the excess sealant with a paper towel or a rag moistened in alcohol. Cut the hardened sealant with a sharp knife or scraper.

approximately 5 minutes after applying the sealant on its surface, a film is formed. Complete curing occurs after 24 hours. Re -use of sealant: if the contents are not fully spent, squeeze a drop of sealant from the tip. The following use, remove the dried cork.