Ski ointment, from -14 to -30 ° C, 40 g, black color

ointments will create the necessary adhesion of skis with snow and ensure smoothness. Professionals recommend that there are different compositions in the arsenal, depending on the air temperature, the state of snow, the duration of the walk and other factors. Before applying a new ointment, do not forget to remove the old with special tools and solvents.

characteristics

• temperature range: from ‒14 to –30 ° C.
• Net mass: 40 g.

Method of application

1. Determination of the area where it is necessary to apply the holding ointment.

Sprint ointments are applied to the clean dry surface of wooden or plastic skis under the block - the middle part of the ski, which begins at the heel of the boot and continues in the direction of the toe of the ski. The length of the block depends on the total length of the ski (usually 60–75 cm).

2. Ointment.

evenly smear the ski under the block. After that, rub the ointment with a cork until a slightly shiny layer is formed on a sliding surface. Firm ointments are applied with several thin layers, and each is rubbed separately.

3. Cooling.

After processing (lubrication), skis should be taken out into the fresh air and cooled for 20-30 minutes. Attention! Do not put the skis in the snow immediately after the release, put them and let cool.

4. Removing the ointment.

upon returning home, it is recommended to clean the skis of the ointment. Remove the main number of composition with a shot. Apply a special washing on the sliding surface of the skis to remove lubrication. Remove the remains with a fabric cloth.