Skyway wiper brush, 14 "/ 360 mm, frameless, 1 adapter

The SkyWay wiper's frameless brushes provide uniform cleansing of the entire surface of the glass. Thanks to the technological improvement of the SkyWay brush, even the smallest particles of water are able to remove. Natural rubber from which brushes are made, and graphite spraying can significantly reduce the noise level, and also increase the service life. And this is not all: the brush slides over the surface with minimal effort, and the rubber remains elastic in the heat, frost, and even under the influence of chemical reagents. The brush tightly adjacent to the glass even at high speed, reliably protecting it from pollution.

Features:

• Due to the simplicity of the adapter installation, 90 % of the cleaning surface of the janitor remains at a high speeds.
• Pointed pressure on the janitor in several places provides 30% more dense contact of the janitor with glass.
• Reducing the weight of the wiper and the improvement of the structure reduced the noise during the operation of the wipers.
• Aerodynamic design of the janitor allows you to provide good contact of the janitor with glass, even at a speed of 190 km/h.

installation:

• Choose the adapter you need.
• Take the janitor with your fingers on both sides.
• Bring the janitor so that the hook rests on the upper edge of the attachment.
• Press the hook so that it fail.
• Pull the janitor away from the hook until it closes.
• Close the fastening cover. blade.