Slimlorous tool for water purification in the Master Pool basin, universal, 3l

The use of a tool for pools allows you to quickly and effectively destroy a wide range of pathogenic microorganisms (bacteria, viruses, fungi).

Chemistry for the Master Pool basin contains substances that prevent the growth of algae in the water of the pool for a long time

The composition of the product includes substances that allow eliminating the clouding of the water of the pool, while the effectiveness of clarification practically does not depend on the level of the pH

The use of this chemistry for the pool during its operation helps to prevent the formation of “lime” deposits on the surface of the pool bowl and heat -expanded equipment.

The drug pH is neutral; does not contain chlorine and heavy metals; Infant - suitable for any type of pools (including SPA).

Application: shake the contents of the bottle! Use the upper cap with a capacity of 50ml for dosage!

The tool is added in portions directly to the pool near the water supply (Trisk) or in several places at the same time (but not before the filters) during the operation of the circulation pump.

The consumption of the product - in accordance with the concentration of chemistry in the water of the pool. The content of the “master pool” in the water of the pool should be maintained within 2.5 - 5 mg/l - according to the drug and controlled weekly either in accredited laboratories, or by hand - using special testers that allow you to determine the content of active substances in water.

Recommended dosages:

• Current processing: 25-30 ml of 10 m3 of water weekly. With intensive use of the pool, the frequency of use and/or dosage is increased in accordance with the indicator of the content of the product in water.
• The first processing: 50-70 ml of the product by 10 m3 of water. A technical break is required in the operation of the pool - at least 12 hours with continuous filtering. Then the filter should be thoroughly washed.

Important recommendations:

• for water for the first preparation, the first disinfectant processing after filling the pool and current disinfection within the first 10-14 days is recommended according to the standard method using chlorine or oxygen disinfectants (chloritex, chloroxons or Oksitest ") for the oxidation of all impurities located in the water;
• 10-14 days after the launch of the pool, you can transfer the pool to process the" master gun ", for this it is necessary to thoroughly rinse the filter, check and adjust (if necessary) The pH level (the pH of the pH of the pool water should be constantly maintained in the range of 7.0-7.4), the water "Aquadekhlor". active oxygen and other oxidizing agents!

  Precautions: protect from children; Do not mix with other chemicals; If you get on the skin and eyes, wash immediately with a large amount of water, if necessary, consult a doctor.

  Composition: polymer cationic surfactants, polycarbon acids, stabilizers.

  Shelf life: one year from the date of manufacture.

  Chemistry storage conditions for pools: Store in a cool room coated and hermetically sealed with original packaging at a temperature of 0 ° C to +25 ° C. Protect from heating and direct sunlight.