SMARAGIPS SUPERFIX Smart GIPS, 20 kg, for installation of decor and artificial gypsum stone

Scope:

Installation of decorative elements (for internal work):

• stucco molding;
• bas -reliefs;
• gypsum 3D panels;
• decorative stone.

sizes no more:

• length - 400 mm;
• width is -150 mm;
• thickness - 25 mm.

composition: high -strength gypsum, fillers, additives.

The base should be:

• solid, dry, cleaned of dirt, dust, oil spots and detachments;
• the surface of the products before applying the composition must be treated with a universal primer;
• in the presence of great irregularities, the base must be aligned with plaster.

Preparation of the solution:

The dry mixture is closed with water (from 25 ° C to 40 ° C) according to the principle of “mixture into water” in the ratio of 1 kg of the mixture-0.35-0.45 liters of liquid (1.75-2.25 liters of water per 5 kg of mixture) depending on the desired consistency.

Next, mix the mixture manually, or with a construction mixer or drill with a nozzle of at least 5 minutes until a homogeneous mass is obtained, then withstand for 3 minutes and mix again briefly.

Procedure for work:

• evenly, with a thin layer, distribute the composition to the surface of the decorative element;
• excess a mortar mixture immediately remove;
• the time of complete drying up to 7 days.