Smart gypsum Samaragips, 1 kg, sculptural-lodge mixture for 3D casting

Scope:

• Making elements of decor of increased complexity;
• gypsum 3D panels;
• sculptures.

the basis of manufacture:

Advantages:

• Exact reproduction of the surface of the form;
• High mechanical strength of finished products (35 MPa);
• The optimal terms of the process;
• compatibility with dyes;
• environmentality.

Application:

• Close the material on the principle of “mixture into water”, mix with a construction mixer or drill with a no less than 2 minutes until a homogeneous mass is obtained;
• pour the resulting resulting Material in a form, pre-moistened with water;
• The use of the vibro-stol is not a prerequisite, but the surface quality will be better when vibrating forms within 5-10 seconds;
• remove the excess of the mixture with a spatula. < /li >

Technical characteristics:

Use only pure tools and water!

• The falling of the form depends on the amount of water use. Subject to the recommendations of the manufacturer, the collapse is possible after 30 minutes;
• when the products are completely drying after 7 days, the color of the painted product becomes lighter into several tones;
• The mixture is compatible with iron -cited pigments. When using pigments of a different chemical nature, it is recommended to check, interaction on a small amount of the mixture;
• is possible to make external decorative elements with subsequent processing by hydrophobizers.