Soil GF-021 GOST, 2 kg, light-gray color

Anti-corrosion primer is designed to primer pre-purified surfaces made of metal.

for internal and external work. It is not an independent coating, it can be used for short -term metal protection from corrosion before finish coloring. Paints and enamel on water -based and organic solvents are easily applied to the soil. Warns the exfoliation of the finish coating. Increases adhesion of fire -retardant and decorative materials to metals, old paintwork.

surface preparation: Mix the primer thoroughly until smooth. If the film was delighted during storage on the surface, it must first be removed. Wooden surfaces intended for color should be cleaned of dust, dirt and an obstructive old coating, it is recommended to process an sandpaper with subsequent dilapidation; Metal - from rust, scale, fat and other pollution. If the surface was painted earlier, the fragile layers of the old paint are removed with a scraper, polish the entire surface, remove the dust from grinding. Clothes and irregularities are aligned with putty.

Material application: The primer is applied with a brush, roller or spray on a carefully cleaned, prepared, dry surface. The prepared primer is applied to the protected surface at a temperature of the surrounding air from +5 ° C to +30 ° C and the relative humidity of no higher than 80 %. The drying time of each layer at a temperature of (20 ± 2) ° C and the relative humidity of the air (65 ± 5) %-no more than 3-4 hours. At lower temperatures and at higher humidity, the drying time can increase.

waste disposal: not drain into the sewer, reservoirs, to the ground! After the remnants of the GF-021 primer in the bank in the bank, to be disposed of in tightly closed containers as household or construction garbage.