Street battery lamp, lantern, 150 diodes, 2 modes

The lantern is a wall battery with a solar battery and a motion sensor-this is a wireless lighting device that accumulates energy from the solar panel during the day and automatically turns on when the movement is detected in the dark. , ideal for lighting large areas up to 150 square meters. It works on a built -in large capacity battery (10,000 mAh). The equipment includes remote control, fixing screws and a lamppost for installing at the desired height. A powerful (120 watts) lantern is equipped with 150 SMD LED 2835 LEDs, providing a bright and uniform light flow. Charging time from 5 to 8 hours provides up to 15-20 hours of work without recharging, and a solar panel with a voltage of up to 6 V, and with a capacity of 6 W provides charging from solar energy during the day. It is supplied in a reliable box for safe transportation and storage. With the help of remote control, you can adjust brightness, which makes the use of the lantern even more convenient and functional.

the advantages of this lantern:

• Autonomy - does not require connection to the mains, replacement of batteries.
• environmental friendliness - does not distinguish harmful substances, uses a renewable energy source.
• Economic - free lighting thanks to the solar battery.
• ease of installation - is easily installed on the wall.
• sensor of movement - saves energy, activates only when the movement is detected. < /li >

Installation Instructions:

1) First, take nuts and screws to fix the solar panel and U-shaped frame.

2 ) The flashlight is recommended to be installed at an angle of 30-45 degrees to the horizontal plane.

3) The solar battery is required for the correct charging so that the sun's rays are not blocked by buildings, trees, etc. And also the choice of installation site contributed to the achievement of the most long exposure to sunlight during the day. Solar panels cannot be installed under glass or indoor.

installation of the lamp:

• Attach the lamp to the wall using two fasteners.
• using four Sockery the flashlight on the pillar.
• The angle of inclination can be adjusted independently in accordance with your needs.
• Lantern cannot be installed in the lowlands to avoid their wetting.
• Insert the plug into the connector and tighten the wheel to complete the installation.