Thermal paste "KPT-8", 8 gr, syringe

Use the KPT-8 thermal grease to improve the heat transfer between the details of the computer and ensure heat removal, as well as as electrical insulation.

apply the product to the dust peeled from dust and a low -fat surface with a thin and uniform layer, install the parts and remove the excess substance.

It is important to remember that the principle of action of thermal paste is as follows: it fills microneries, displaces air with poor thermal conductivity, and thereby increases the area of ​​heat transfer. If you apply it with a thick layer, then the effect will be the opposite.

Advantages:

• moisture and atmosphere;
• A wide range of operating temperatures from ‒60 to +200 ° C;
• biological and chemical inertia;
• repairs.

• Dynamic viscosity at +20 ° C: 90-150 PA • s.
• Dielectic permeability at a frequency of not more than 10 MHz: 4.
• Tangens of the angle of dielectic losses at a frequency of not more than 10 MHz: 0.005.
• specific volumetric electrical resistance: at least 10e11 Ohms • see.
• Electric strength: 2-5 kV/mm.
• Thermal conductivity: 0.7–0.8 W/(M • K).
• Mass: 8 g.
• Shelf life: 3 years.