Thermostatic set "STM" thermo, for the radiator, direct, 1/2 "

Thermostatic kit for the radiator (direct) is designed to connect the heating radiator and automatic control of the flow rate of the coolant through it, depending on the air temperature in the room.

Thermostatic head (thermoregulator) is designed to automatically control the temperature in the room by way partial opening/overlap of the thermostatic valve on which it is installed. The thermostatic head has 6 working positions: snowflakes and numbers from 1 to 5. The snowflake corresponds to the temperature in the room equal to 7 ° C. Each setup step is 4 degrees. The temperature settings range of the thermostatic head: +7... +28 ° C. The use of the thermostatic head allows you to automatically maintain the air temperature in the room at a given level with an accuracy of 1 ° C. The use of the kit contributes to the effective energy saving and saving heating costs.

The thermostatic valve is designed to control the heat transfer of the heating device (regulation of the flow rate of the coolant) in automatic mode when used with the thermostatic head. The thermostatic valve is repairing and equipped with a hemisphere. The presence of a hemisphere allows you to mount and dismantle the valve without dismantling the pipeline.

The shut -off valve for the radiator is designed to adjust the flow rate of the coolant through the heating device when balancing the system. The presence of a half -axle allows you to mount and dismantle the valve without dismantling the pipeline. The shut -off valve is repaired. The capacity of the valve does not depend on the direction of the flow.

Design features, manufacturing technologies and the materials used provide long -term operation of the components used during the operation in the conditions of domestic engineering systems.

The kit is supplied in dust -proof packaging ( Blister).