Torvi winter boots with fur, 4 -layer liner -45C, olive color size 46

Torvi boots will protect you from frost and give you comfort. The top of the boot is made of whole -liter eva. It withstands temperatures up to -45 ° C and, unlike ordinary rubber, does not crack. And all layers of the material create a system that reliably cuts off the cold outside and saves heat.

Comfort provides a warm liner, which is made of modern multi -layer non -woven fabric and fur.

The product consists of 4 -x layers:

1 layer -a mesh that gives the liner strength and wear resistance. The layers of a non -woven canvas are not glued, but fastened with each other with an needle -punched way. Therefore, on top of the grid, in fact, another layer of fibers and air forms. It creates an additional heat -insulating air gap and is important for the process of removal of moisture from the leg;

2 layer - foil, which reflects the external cold and saves heat;

3 layer - this is non -woven material from the mixture modern hollow high canvas and natural linen fibers. This layer holds the heat of the body, resists compression, quickly restores the shape after removing the deformation loads;

4 layer - the fur “under the sheepskin”, contains natural wool, saves the warmth of the body.

The advantages of the boot Torvi:

• model fully corresponds to the declared Russian size, have a wide foot and high ascent;
• The bottom of the boots has a special cellular structure;
• All textiles Details are developed taking into account the harsh weather conditions;
• all -lit parts made of high -quality eva.

Torvi care instructions:

Boots:

• Protect from direct sunlight
• not to keep closer than 1 m from open fire or other heat source (battery, stove, etc.)
• dry At room temperature
• , wash with a soft cloth or sponge in warm water with soap
• do not use hard products (metal brushes, sandpaper, abrasive cleaning products)

liners:

• Do not wash in the washing machine
• do not use chemical cleaning
• Dry at room temperature
• Do not stroke

to protect boots and liners from interaction with aggressive chemicals: organic solvents (benzene, toluene), acids, alkalis.