True towel “Trugor” PEK SP 6 P, 800 x 500 mm, VGP, Black

The product is made of AISI 201 stainless steel. Vertical pipes d = 32 mm, for horizontal inserts a pipe d = 18 mm is used.

the heating element in a towel is a heating cable - an analogue of the "warm floor", cable It is seasoned inside each pipe and transfers heat to the surface of the product. In the inclined state, a temperature of 40-600 degrees is constantly maintained.

the built-in temperature adjustment function: 40/50/60 degrees

The heated towel rail is equipped with a control panel. The on/off button and the timer for 2/4/6 hours, which allows you to turn on the product for a limited time. This function makes it possible to save electricity.

The heated towel rail is attached to the wall for four holders. The universal performance of the product allows you to connect it, both on the right and on the left.

Thanks to the two unwinding boxes welded in the lower part of the vertical pipes, in which the electrical wiring is connected, a hidden connection to electricity on the left and right.

The kit also has a cord with a fork that will be needed when connecting to the outlet.

Panel of inclusion:

mode No. 1 - work within 2 hours with the subsequent disconnection. < /p>

mode No. 2 - work within 4 hours followed by shutdown.

mode No. 3 - work within 6 hours followed by disconnection.