Universal acrylic varnish Ozon Akvalac-Interior 9l

The universal acrylic varnish is designed for protective and decorative decoration of various wooden, panel, log, as well as concrete, brick and stone surfaces of the room.

The product has excellent adhesion, penetrates well into the pores, emphasizing the texture of wood, forms a transparent wear -resistant elastic coating, resistant to water and detergents. It is possible to use varnish for processing previously painted or pasted with paper wallpaper surfaces to give them moisture and wear resistance. Not intended for saunas, baths, floors and surfaces subject to severe mechanical wear.

Recommendations for use. Apply a roller, brush or spray. Before using the varnish, mix and, if necessary, dilute with water (no more than 5 %).

For the processing of wooden surfaces, apply the product with a brush or a roller in 2-3 layers along the wood fibers continuously from the edge to the edge. Apply the second layer no earlier than 1-2 hours after the first. Before the next layer, slightly polish the surface. Do not use varnish at temperatures below 5 ° C and air humidity of more than 80 %.

drying time. 0.5 hours - from dust, 24 hours - for operation.

Consumption. 100-150 ml/m2 in one layer. Productivity - 7-10 m2/l.

tinting. Machine tinting. The color of the material covered with tinted varnish depends on the breed and shade of the tree, as well as on the number of layers of the product.

Transportation and storage. Keep and transport in a hermetically sealed container at a temperature of +5 to +40 ° C. Do not expose a long effect of direct sunlight.

Technical characteristics

density: about 1 g/cm3. Drying time: about 1 hour.