Veber 8011, 10x, diameter 25 mm, LED backlight

The Veber 8011 measuring magnifying glass is designed to consider and measure the sizes of small flat objects: cards, printing products, etc. In medicine, it can be used as a dermatoscope.

“Linse” of lups is a “optical system” from Two lenses (material - optical glass) located at a distance of 17 mm from each other. This design provides a flat image field without distortion and staining along the edges of the field of vision.

to the lower part of the frame of the magnifying glass, the lid is attached a lid (removable) in the center of which there is a square aperture with dimensions of 2 x 2 cm. For all four The edges of the diaphragm (on the inside of the lid-lid) are placed measuring risks. When conducting measurements, it is necessary to enable LED backlight - only then these risks will be visible to the observer. Thus, it is possible to measure objects with a side size of up to 2 cm with an accuracy of 0.5 mm. With a loud lid removed by the lid of the magnifying glass, it is about 30 mm.

To conduct observations of the magnifying glass, it is installed and moved directly along the observed object-the map, book, skin, etc. At the same time, the subject of observation always remains sharply. The magnitude of the magnitude that is in contact with the object does not have roughness, bulges, etc., therefore, the magnifier can be moved without fear of damaging the surface of the observed object.

The use of lighting (3 bright LEDs of white light) allows not only to illuminate the studied surface but also to highlight measuring scales.

on the end part of the handle is a plastic overlap with a protrusion, which serves as an additional support of the handle. Thanks to him, the handle of the magnifying glass is always parallel to the plane of the observed object, and the frame of the magnifying glass fits tightly to its surface.

the case and the handle of the magnifier are made of metal. The Soft-Tach coating is applied to the lupa frame. The pen is also a battery compartment for 2 AA batteries. On the left side of the handle there is a button for turning on the LED backlight.

for storage and transportation in the kit, there is a case with a zipper, and to clean the surface of the lens from pollution - a napkin. To recommend for collectors, numismatists, people who control the condition of the skin, etc.