Wall battery flashlight, 25,000 mAh, SMD 2835, solar battery

The street wall lamp in an aluminum-plastic case with metal elements is an excellent solution for lighting a territory with an area of ​​up to 210 square meters. It works from the built -in battery - through the solar panel. A remote control and installation screws are delivered with the lantern in the kit in a reliable cardboard packaging. The power of the lantern is 300 watts, the SMD 2835 LEDs are used as light sources in the amount of 328 pieces. The battery charging time is from 5 to 8 hours, the battery time is from 24 to 36 hours. There is also a 6 volt solar panel, 30 watts for charging the battery from solar energy. This functional and reliable street lamp is perfect for use in the country, for illuminating the personal plot in the dark.

Instructions for installation:

1) First take nuts and screws. To fix the solar panel and the U-shaped frame.

2) It is recommended to install a lantern at an angle of 30-45 degrees to the horizontal plane.

3) For the correct charging of the solar battery, it is required that the sun's rays are not blocked by buildings, trees, etc., and so that the choice of installation site contributes to the achievement of the most long exposure to sunlight during the day. Sunny panels cannot be installed under glass or indoors.

installation of the lamp:

• Attach the lamp to the wall using two fasteners
• Using four screws, fix the lamp on the pillar
• The angle of inclination can be adjusted independently in accordance with your needs
• the lamp cannot be installed in the lowlands to avoid their wetting
• insert the plug into the connector and tighten the wheel to complete the installation.