Wall battery, IP66, 20,000 mAh, 450 SMD 2835, solar battery

The lantern is a wall battery with a solar battery and a motion sensor is a wireless lighting device that accumulates energy from the solar panel and automatically turns on when the movement is detected in the dark. , ideal for lighting large areas up to 210 square meters. It works on a built -in large capacity battery (20,000 mAh). The equipment includes remote control, fasteners and a lamppost for installing at the desired height. A powerful (300 watts) lantern is equipped with 450 SMD LED 2835 LEDs, providing a bright and uniform light flow. Charging time from 5 to 8 hours provides up to 30-35 hours of operation without recharging, and a solar panel with a voltage of up to 6 V, and with a capacity of 10 W provides charging from solar energy during the day. It is supplied in a reliable box for safe transportation and storage. With the help of remote control, you can adjust brightness, which makes the use of the lantern even more convenient and functional.

the advantages of this lantern:

• Autonomy - does not require connection to the mains, replacement of batteries.
• environmental friendliness - does not distinguish harmful substances, uses a renewable energy source.
• Economic - free lighting thanks to the solar battery.
• ease of installation - is easily installed on the wall.
• The motion sensor - saves energy, is activated only when traffic is detected.
• Compactness and mobility - small size, ease of movement.
• This lantern will become an indispensable assistant in the garden, in the country, in the courtyard, garage, in arbors and verandas.
< /ul>

Installation instructions:

1) First, take nuts and screw nuts to fix the solar panel and the U-shaped frame.

2) It is recommended to install the lantern at an angle of 30-45 degrees to the horizontal plane.

3), the correct charging of the solar battery is required so that the sun's rays are not blocked by buildings, trees, etc., as well as the choice of installation site contributes to the achievement of the most long exposure to sunlight during the day. Solar panels cannot be installed under glass or indoor.

installation of the lamp:

• Attach the lamp to the wall using two fasteners.
• using four Sockery the flashlight on the pillar.
• The angle of inclination can be adjusted independently in accordance with your needs.
• Lantern cannot be installed in the lowlands to avoid their wetting.
• Insert the plug into the connector and tighten the wheel to complete the installation.

Operating instructions:

1) To turn on the flashlight, click on the remote control, the lamp blinks twice.

2) To turn on the automatic mode, click OFF, the flashlight blinks twice. In this mode, the flashlight will automatically begin to work when the dark time of day occurs and will automatically turn off at dawn.

3) Please store the remote control in a safe place. With his loss, the lantern over time will go into automatic mode.