Water-dispersion paint for ceilings, 3 kg

Designed for applying in dry rooms to plastered, concrete, gypsum, brick, wooden and other porous surfaces, as well as wallpaper, drywall, chipboard, DVP. Advantages:

• deep matte surface, hiding the flaws on the surface.
• The color is super -bud, does not change after the time.
• vapor permeable.
• quickly dries, does not stick after drying.
• is suitable for repeated repainting.
• has high thixotropic and hiding, due to which it is evenly applied to the surface.
• without smell.
• does not contain volatile, toxic components.
• fire and explosion-proof.

application system. Before applying the paint, it is necessary to prepare the surface responsibly. It should be clean, durable, dry, cleaned of dust, dirt, from the exfolved and obscure old paint, if necessary, degree. It is recommended to cover the surface with a primer of TM, which will strengthen the surface, give it excellent surface-setting properties.

application. Mix thoroughly before applying the paint. Apply with a brush, roller or spray gun. A two -layer application is recommended, with drying between layers of 2 hours. To reduce viscosity, the paint is allowed to dilute TM with a primer, but not more than a 5% ratio.

drying time. “For Pink” - 1 hour, full - 24 hours at a temperature of +20C and air humidity 65%. Reducing temperature and increased humidity greatly complicates film formation and requires more time for this.

consumption. 250-400 g/m², depending on the absorption of the surface.

tinting. The paint can be stunned in any color according to any tinting system.

tool care. Immediately after the end of work with the material, rinse the tool with a large amount of water.

storage and transportation. Store 12 months in a closed original package at a temperature of +5 ° C to +30 ° C. If the packaging has an additional “frost -resistant” label, transportation is allowed at a temperature of up to -25 ° C. When freezing the product, thawing at room temperature naturally. After thawing, the product retains all its qualities.

precautions. It is necessary to carry out work in a well -ventilated room using personal protective equipment for respiratory organs, vision and skin: glasses, gloves, respirator. If the material gets into the eyes, it is necessary to immediately rinse them with a large amount of water. If the material gets on the skin, remove it with a cotton swab and rinse the contaminated area with a plentiful amount of water. If necessary, consult a doctor. Protect from children.

Composition. Acrylic latex, titanium dioxide, fillers, thickening, technological additives, water.