Cloud valve 18 mm, with a shutter

Drainage drainage valve with a “patriot” shutter for PVC inflatable boat. Designed to discharge water that has fallen into the boat during movement. The tightness is ensured by a shutter valve. It is installed in the lower part of the transom.

Features:

to install this valve, the use of sealant is not necessary. In the kit there are rubber sealing rings on both sides of the transceusa board.

This valve can be used, inter alia, on transits with a thickness of less than 25 mm. The fitting under the desired thickness of the transformation board can be carried out by trimming the inher part of the outer flange.

Characteristics:

Type of valve: drainage with the shutter;

The thickness of the transvois board: 18mm thick ;

Material: shockproof plastic.