Drain valve 35 mm, with a shutter

Drainage drainage valve with the “Patriot” shutter No. 3 for the PVC inflatable boat. Designed to discharge water that has fallen into the boat during movement. The tightness is ensured by a shutter valve. It is installed in the lower part of the transom.

Feature:

• To install this valve, the use of a sealant is not necessary. The kit includes rubber sealing rings on both sides of the transceusa board.
• This valve can be used, including on transits with a thickness of less than 25 mm. The fitting under the desired thickness of the transformation board can be carried out by trimming the inher part of the outer flange.

Descriptions:

• Type of valve: drainage with the shutter
• Thickness thickness: 35 mm
• material: shock -resistant plastic